Best CS2 Crosshair Codes (2026 Update)

Want to try a different crosshair without adjusting every slider first? Import a preset, keep the parts you like and change the ones that get in the way. Save your current code before starting. A player’s name is a useful way to find an earlier setup, but it doesn’t mean they still use that exact code.

Use the list for a quick starting point, then check it alongside the rest of your CS2 settings, especially resolution and display scaling.

The tables collect 30 pro-associated presets and five creator presets previously published in this guide. They are not a live feed of anyone’s settings. To try one, copy the complete CSGO- string, open Settings > Crosshair/Scopes, choose Share or Import, and paste it.

How to Import a CS2 Crosshair Code in 30 Seconds

1. Open CS2 Settings, then select Crosshair/Scopes.
2. Select Share or Import on the preview panel.
3. Paste the complete share code and choose Import.
4. Test it on the same resolution and aspect ratio you normally use.

Save your current code before importing another crosshair. That gives you a quick way back if the new shape is hard to see.

What Makes a Good CS2 Crosshair?

First decide how much visual feedback you want. Shape and recoil-following behavior are separate choices, so a static shape does not always mean the crosshair stays fixed on screen:

• Static: Keeps a fixed shape. Leave Follow Recoil off if you also want a fixed screen-center reference.
• Dynamic: Changes with movement and firing to give accuracy feedback.
• Follow Recoil: A separate setting that moves the crosshair with recoil, including when using a static shape.

Green and cyan are common starting colors, but compare them against your usual maps rather than assuming either will stand out everywhere. An outline can help when the base color blends into a wall.

The menu preview only tells you so much. Try a pale wall, a dark corridor and a busy fight with smoke in view. If you have to search for the crosshair before placing it, the color, opacity or outline needs attention. The opposite problem matters too: a bright, heavy shape may be easy to find while covering the detail you want to aim at.

Then compare thickness and gap together. Thin lines leave more of the target visible but can be harder to follow during a spray; thick ones trade some of that clear view for visibility. A tighter opening gives you a small reference to place, while a wider gap leaves more room around the target. Dynamic feedback can show accuracy changes during practice, whereas a static reference stays visually simpler. Choose the smallest readable setup, not simply the smallest number the menu allows.

How Resolution and Aspect Ratio Change What You See

Pixel dimensions rescale with resolution in CS2. For example, a thickness of 2 pixels set at 720p becomes 4 pixels at 1440p to keep the proportions. Stretching 4:3 to fill a widescreen monitor happens separately and can make the shape look wider. That’s why the useful comparison is on the resolution and scaling you normally play with.

Best Pro Player CS2 Crosshair Codes

These are earlier presets associated with the listed players. The ProSettings crosshair database may show a newer configuration, and an imported older code may not include every newer crosshair or scope option. Check the menu preview after import and save your own version.

Pro Crosshair Presets

More Pro Crosshair Presets

A small static cross in a contrasting color is a sensible first comparison. You don’t have to keep it just because a pro-associated preset uses it. Look for the aim point, then look through it at a distant target: both should be easy to see.

Import one code and take it through a short practice session. Try moving, stopping, tapping and spraying, then hold an angle with a target farther away. A shape that looked sharp in the menu may disappear during recoil or cover a distant head. Those are useful reasons to adjust it; one missed shot isn’t.

For a rifle, pay attention to bursts and distant angles. An AWP scope is a separate graphic, so copying an AWPer’s ordinary crosshair is not the same as copying their whole scoped setup.

Use the same resolution and practice routine for each comparison. Otherwise, you may be judging the display change rather than the crosshair. A player’s saved code is also just one version of their setup, not something they are obliged to keep.

Best CS2 Streamer Crosshair Codes

The creator codes below are earlier presets too. You can try the same starting shape without treating it as a claim about what that person uses in their next stream.

Import Troubleshooting and Manual Adjustments

Import a saved code:

1. Open Settings
2. Go to Crosshair/Scopes
3. Click Share or Import
4. Paste the code and confirm

Adjust individual settings:

The CS2 developer console is useful when you only want to change one value and leave the rest alone.

A share code belongs in Settings > Crosshair/Scopes > Share or Import, not in the console. Keep its CSGO- prefix and separators when you copy it.

With a cl_crosshair command, you enter a setting name and a value instead of an import code. Press Enter to apply it. Semicolons let you put several commands on one line, but start with one so you know what changed.

A rejected code may simply be an incomplete copy. Check the start and end of the string and remove stray spaces. There have also been changes to the share-code format for newer options. That is not evidence that every old preset fails, but a fresh export is worth requesting if yours won’t load.

How to Copy an Opponent’s Crosshair Mid-Match

1. Press Tab to open the scoreboard.
2. Select the player whose crosshair you want.
3. Choose Copy Crosshair.
4. Confirm that you want to replace the current setup.

Save a backup before copying another player’s crosshair. If that mode doesn’t offer the scoreboard option, the player can share a code with you instead.

How to Build Your Own CS2 Crosshair (Command Reference)

Keep an old CFG as a backup, not as a conversion chart for the newer CS2 console commands. The legacy cl_crosshairsize and cl_crosshairthickness values used different units. Entering those same numbers into the pixel controls won’t recreate the old dimensions.

With cl_crosshairstyle 4, you have a Static Cross to work on. Perhaps the bars are a good length but look too heavy: that’s a reason to lower thickness, not shorten them. Or perhaps the opening feels cramped, in which case try the gap. Working this way is easier than moving every slider and wondering which change helped.

Want cyan instead of green? Leave red at 0 and green at 255, then raise blue from 0 to 255. That changes the color, not its transparency, which belongs to cl_crosshaircolor_a. The outline has its own color controls. Add the dot if you would rather put a mark on the target than place it inside an empty opening.

Still moving during a spray, despite selecting a static shape? Follow Recoil is the other setting to check. Turn it off with cl_crosshair_recoil 0 to leave the static reticle at the center as you fire.

How to Choose the Right Crosshair for Your Playstyle

A distant opponent is a useful size comparison. If the head disappears under your crosshair, reduce what is covering it before trying a completely different preset. Up close, visibility may be the bigger problem: the tiny shape that left a distant target unobstructed can be hard to follow during a burst. An AWP’s scoped view needs a separate comparison because its scope graphic is not the ordinary crosshair.

A missed shot is not much of a diagnosis. Were you unable to find the crosshair, or was it hiding the head? The first problem points toward contrast; the second points toward dimensions. Give a preset a few sessions and adjust the thing that is actually getting in the way.

FAQ