Best Way to Destroy Doors in Rust

When you’re deep into Rust, knowing how to break through doors efficiently can be the difference between scoring a massive haul or walking away empty-handed. That said, here’s the best way to destroy doors in Rust:

Why Door Destruction Matters

In Rust, raiding is a core part of the game. Whether you’re attacking an enemy’s base or defending your own, the ability to break through doors efficiently is crucial.

How to remove doors
by inplayrust

I’ve learned the hard way that going in unprepared can lead to a lot of wasted resources and missed opportunities. That’s why knowing the right tools and tactics can save you a lot of time and frustration.

Also Check: How Many HVs Do You Need for Bradley in Rust

Tools of the Trade

Here’s a breakdown of the main tools you’ll use to destroy doors in Rust, based on my experience:

1. Explosive Charges (Satchel and C4)
   • Explosive Charges are a solid choice for most door types, but they require careful placement to maximize their effectiveness. I’ve found that they work best on Sheet Metal doors, which are common in mid-tier bases.
   • C4 is your go-to for the toughest doors, like Armored Doors. Yes, it’s expensive, but the damage output is worth it when you’re up against well-fortified enemies.
2. Satchel Charges
   • Satchel Charges are a cheaper alternative to C4 and can still pack a punch, especially against Wooden Doors. They’re perfect if you’re raiding smaller bases or if you’re still gathering resources for a bigger raid.

Door Types in Rust and How to Deal with Them

@rustguides

The four types of doors in Rust, again thank you for the sponsor @rustypot.com

♬ original sound – RustGuides

Not all doors in Rust are created equal. Here’s how I tackle each type:

• Wooden Doors: The easiest to break, Wooden Doors can be taken down with just about anything, but Satchel Charges are the most resource-efficient method. If you’re in the early game, even a Stone Hatchet can do the job, but it’s slow and noisy.
• Sheet Metal Doors: These are a step up in difficulty. You’ll want to use Explosive Charges for these, as they’re the most cost-effective. I’ve also had success using Satchels, but it takes more of them, so plan accordingly.
• Armored Doors: The toughest doors you’ll encounter. C4 is the best option here. It might be tempting to try something cheaper, but trust me, you’ll just end up wasting resources.

Also Check: How to Get Metal in Rust Efficiently

Best Way to Break Garage Door in Rust

o destroy a Garage Door, you have a few effective options:

1. C4: You’ll need 2 C4 charges to fully destroy a Garage Door, making it one of the quickest methods.
2. Rockets: Using 3 rockets will also do the job. Rockets are particularly useful because they cause splash damage, which can affect nearby structures.
3. Satchel Charges: You need 9 Satchel Charges, but they can be less reliable due to their dud chance, so it’s best to carry extra.

How to Break Sheet Metal Door in Rust

Breaking a Sheet Metal Door efficiently involves:

1. Explosive 5.56 Ammo: It takes 63 rounds to destroy a Sheet Metal Door. This method is preferred if you have plenty of ammo.
2. Satchel Charges: It requires 4 Satchel Charges, but as with the Garage Door, the dud rate can make it a bit unreliable.
3. C4: One C4 will do the trick, which is faster but more resource-intensive.

Also Check: How to Bypass Rust Game Ban

Best Way to Break Wood Door in Rust

Wooden doors are much easier to deal with:

1. Molotovs: The cheapest and most effective way is to use 2 Molotov Cocktails, which will burn through the door quickly.
2. Hatchet/Pickaxe: If you don’t mind spending time, a Hatchet or Pickaxe can break it down, though it’s slower and louder​.

Raiding Tips for Maximum Efficiency

Here’s what I’ve found works best when planning a raid:

1. Resource Management: Always try to minimize the resources you use. That means knowing the exact amount of explosives needed for the doors you’re targeting. For example, don’t waste C4 on a Wooden Door when a Satchel Charge will do the trick.
2. Target the Soft Side: Every door in Rust has a “soft side” and a “hard side.” The soft side takes more damage, so always aim for that. This might sound obvious, but in the heat of the moment, it’s easy to forget.
3. Pre-Raid Assessment: Before you start placing charges, take a moment to analyze the base. Look for weak points and assess the door types. This can save you from unnecessary complications during the raid.

Final Thoughts

Destroying doors in Rust is a skill that takes time to master, but with the right tools and tactics, you can become a formidable raider. Whether you’re just starting out or looking to refine your raiding strategy, I hope this guide helps you make the most of your raids.

Frequently Asked Questions